How to mic guitar amps

Can a microphone be used with a guitar amp?

Yes, you can use a guitar amp as a speaker to play music or to possibly plug in a microphone. While a guitar amp won’t sound as good as a proper sound system designed to play music, you can achieve decent results when done properly.

Why do guitarists MIC their amps?

A microphone in front of an amplifier that is carrying a different audio signal won’t feedback just because of its placement. In a guitar amp the speakers themselves can be an important part of the overall tone of the amplifier, so its important to get that included in the tone you send through the PA system.

What is the best mic for recording guitar amp?

The 7 Best Microphones for Recording Electric Guitar

  1. Shure SM57. Common wisdom states that guitar amps are typically recorded with dynamic mics. …
  2. Sennheiser MD421. Often considered the standard “alternative” to the SM57 on electric guitar… …
  3. Sennheiser e609. …
  4. AKG C414. …
  5. Neumann U87. …
  6. Royer 121. …
  7. Beyerdynamic M160.

Can I plug a guitar into a mic input?

A mic input is designed to be much more sensitive than a guitar input, because the magnets in a microphone are smaller and put out lower voltage than the magnets in an electric guitar pickup. … However, if the mic inputs have a “pad,” which is a button that lowers the input, usually by 20db or more, you can use it.

Can I connect microphone to amplifier?

Any microphone is cable of connecting with an amplifier. However, hooking up the microphone does require you to use an adapter as the signal coming from the microphone uses an XLR cable while the amp accepts 1/4-inch connections. …

You might be interested:  How to read guitar musical notes

Can you record electric guitar with a condenser mic?


Dynamic, condenser and ribbon microphones can be used to record electric guitars, but they each serve a different purpose. Some guitarists like to turn it up LOUD. … Dynamic mics are capable of recording extremely high sound pressure levels (SPL) without distorting the signal.

How do you mic a guitar?

7 Critical Tips On How To Mic An Acoustic Guitar

  1. Do not place the microphone directly in front of the sound hole. …
  2. For a balanced sound that captures high end, place the mic about 12 to 16 inches away from the 12th fret. …
  3. For a balanced sound that adds a little more bass, try positioning the mic a little above the sound hole or behind and below the bridge.

How do you mic a small guitar amp?

How to Mic Guitar Amps and Cabs in the Studio

  1. Tip #1: Place a dynamic mic pointed at the center of the amp’s speaker cone, up against the grille cloth. …
  2. Tip #2: Point the mic at or near the center of the speaker cone, a short distance away. …
  3. Tip #3: Place a condenser mic at about a 45 degree angle from the front of the speaker cabinet, about 8 to 12 inches away.

What amp is best for vocals?

Best Acoustic Amps for Vocals – 5 Options To Consider

  • Best Acoustic Amps for Vocals. Boss Acoustic Singer Pro. Behringer Ultratone K900FX Keyboard Amplifier. Fender Frontman 10G Electric Amplifier. Fender Acoustasonic 15. Marshall AS50D.
  • Conclusion – Best Amps for Vocals.

Which is better Shure sm57 or sm58?

The SM58 was designed for vocal applications, and therefore uses a ball grille with built in pop filter to eliminate plosives. … The SM57 is designed as an instrument microphone, where a smaller grille size is more practical and plosives are less of a concern.

You might be interested:  How to play take on me on guitar

Do microphones need amplifier?

If you are using a mic, you need a pre-amp. Microphones produce weak signals (mic level) which must be boosted up to line level. This is what a pre-amp does. It may be integrated in to the microphone or the mixer or the audio interface or a stand alone unit, but there is one somewhere with any microphone you use.

Can I plug my amp into my interface?

If your amp has a “line out” or headphones jack, then you should be able to connect that to the audio interface. … However do not plug speaker output(s) into the inputs of an audio interface — this will surely break the amp or the interface (or both).

Leave a Reply

Your email address will not be published. Required fields are marked *